Find Your Ring Size - Free Ring Sizer
Ring Sizing Information
(North America):
There are two types of sizing systems in North America; Standard Fit and Comfort Fit. Standard fit rings and wedding bands are the most common types. Comfort Fit is newer and not as well known as Standard Fit. Both types of fit are explained below.
Comfort Fit:
This type of fitting is defined as a ring that is domed in the interior (where the ring touches the finger), instead of flat, like Standard Fit. The diameter at the exact middle of the ring (between the two edges) is smaller than the diameter at the edges of the ring. This type of fit is most commonly used in rings that are difficult to resize, such as tungsten, ceramic, cobalt chrome and titanium. This is why tungsten rings commonly have lifetime replacement programs for sizing, similar to Larson Jewelers’ industry leading no fee lifetime sizing warranty for tungsten wedding bands. The advantages of Comfort Fit are the ring slides over the knuckle easier and the ring creates less friction because it covers less skin surface area.
Determining Comfort Fit Size:
A good method of determining your Comfort Fit size is to first determine your Standard Fit size at a local jeweler (explained below), and then order a half size smaller. For example, if you are measured for a Standard Fit size 9.0 by your local jeweler, you should order a Comfort Fit size 8.5. This is simply a general rule of thumb and not an exact science. Ring sizes are a bit like shoe sizes and differ slightly from manufacturer to manufacturer. The most accurate way to determine your Comfort Fit size is to request our FREE ring sizer. Our ring sizer is very accurate so, you do not need to order a half size smaller. Just order the exact size you were measured at by our ring sizer.
Standard Fit:
This type of fitting is defined as a ring that is flat along the interior of the ring (where the ring touches the ring finger). This is easiest to illustrate by comparing the interior of the ring to the interior of a pipe, it is the same diameter from one edge to the other. This type of fit is most commonly used in precious metal rings such as platinum, palladium, and white gold. Although it is slightly less comfortable to wear when compared to Comfort Fit, Standard Fit is definitely not “uncomfortable”. Standard Fit has been used in the jewelry industry for centuries.
Determining Standard Fit Size:
The most accurate method of determining your Standard Fit size is to visit a local jeweler. They will most likely have a tool that looks like a bunch of rings on a keychain. This will provide an accurate measurement for any of our Standard Fit rings. You may also request our FREE ring sizer, which is accurate for rings up to 7 mm wide. If you want to order a ring wider than 7 mm, you may consider going up half a size.
International Sizing:
If you live outside of North American, you can go to a jeweler near you to get your finger measured. Then, simply tell us your size in your country and we will convert it to the proper US ring size for you. Or, if you can find out the diameter or circumference of your ring size in millimeters, we will be able to convert it to the proper US size as well. If you can wait about 1 - 2 weeks, you may request a free ring sizer and we can send it to any country in the world, at no charge to you. Just fill out the form to the right. If you do not see your country, e-mail us so we can add it for you.
|
|
SKU:8032-6GC
DARIUS Cross Matte Palladium Ring with Polished Step Edges by Novell - 4mm - 8mm
DARIUS
Cross Matte Palladium Ring with Polished Step Edges - 4mm - 8mm
Contemporary and modern are the words that come to mind when looking at this rare and skillfully designed style from our Palladium Wedding Bands line. They have polished step down edges and a raised slightly domed center with a rare cross matte finish. These rings are available in a variety of metals and widths. Customized stone settings also available. The ring pictured here is 6 mm wide and made of 950 Palladium, a Platinum Group Metal that shares many of the same physical properties as Platinum, but is priced similar to white gold.
 |
| Click to Close |
|
Lowest Price Guaranteed!
Product Details
|
| Width: |
4 - 8 mm
|
| Thickness (varies by size): |
1.8 mm - 2.1 mm
|
| Approx. Weight (varies by size): |
4 - 15 grams
|
Type of Fit:
|
Comfort Fit
|
Manufacturing Time:
|
12 Business Days
|
Shipping:
|
2 Day (Free)
|
Returns/Exchanges:
|
30 Days
|
Novell Lifetime Warranty
All Novell rings are warranted from defect through normal usage. Your Novell wedding ring comes with lifetime repolishing and lifetime resizing. If any product is worked on by any source - outside of Novell's expert factory - warranty is immediately forfeited. Engraving does not void the warranty, but when a ring is replaced the warranty does not cover re-engraving. For complete warranty details please see our Warranty information page.
Note: Ring must be registered at Novell's "Ring Registration" page to qualify for warranty service.
LYON Braided Silver Inlay Domed Tungsten Ring - 8 mm
DOMINUS Domed Tungsten Carbide Ring - 4 - 12 mm
Domed Milgrain Edged Palladium Ring
